TRAI Network Anubhav helps you compare recorded mobile network experiences by location, operator and technology. Open the MySpeed dashboard for speed and signal observations, MyCall for user ratings of calls, or Independent Drive Tests for measurements collected on specific test routes. Before comparing operators, match the location, period, technology and metric.
The result is a shortlist of networks worth testing where you live and work. A coloured map, a high average or a handful of fast tests cannot establish which SIM will work best inside your home.
Sources and interface checked on 18 November 2026. Menu labels and available datasets can change. The numerical example below is illustrative; it is not a live result for any operator or city.
What is TRAI Network Anubhav?
Network Anubhav is TRAI’s public platform for viewing network experience information. TRAI announced its launch on 4 November 2026. Start at the official citizen portal rather than a similarly named third-party speed-test site.
The name covers several tools. Choose the one that answers your question:
| You want to know… | Open this section | What the evidence means |
|---|---|---|
| How fast users’ mobile connections tested nearby | MySpeed, with Cellular selected | Measurements submitted through user tests. They reflect those test conditions. |
| How users rated their voice calls | MyCall | Reported call experiences, rated by users. Read the number of ratings with the score. |
| What TRAI measured on an organised test | Independent Drive Tests (IDT) | Results for the routes, locations and period covered by the test. |
| Where an operator predicts its service is available | TSP coverage map | A link to the separate operator coverage-map directory. A predicted footprint is different from measured observations. |
| How to manage unsolicited marketing communication | Do Not Disturb (DND) | A different service within the portal; it is not the network comparison tool. |
How to compare mobile networks in MySpeed
Open the MySpeed dashboard. The page distinguishes User Data Tests (UDT) from Independent Drive Tests (IDT); its data-source menu also offers a combined view. Keep the source fixed while comparing two operators. If you switch source, note the change before interpreting the result.
Step 1: Select Cellular for a SIM comparison
Under Service type, choose Cellular. Fixed broadband answers a different question. A speed test made through a home broadband connection should not be read as a test of a mobile SIM.
For a household comparing both services, record two separate results. It may make sense to choose one provider for mobile and another for broadband, but combining the numbers will not tell you which SIM to buy.
Step 2: Choose the operator and measurement
Use Service providers to select an operator. The provider menu checked for this guide included Airtel, BSNL & MTNL, Jio and Vi. Pay attention to combined labels: a result grouped as BSNL & MTNL should not silently become a claim about just one of them.
Under Metric, the inspected menu offered Coverage, Download Speed and Upload Speed. Pick the measurement relevant to your task:
- Download helps you investigate receiving content, such as a large file.
- Upload matters when sending files, backing up media or transmitting video.
- Coverage observations concern the measured radio conditions represented by that layer. Read its legend rather than treating its colours as speed categories.
A fast download result alone doesn’t establish reliable calls or uploads. If you depend on video meetings, check upload evidence as well, then test an actual meeting on the candidate connection.
Step 3: Match the technology and location
Use Technology to view the relevant network type. Don’t compare one operator’s 5G-only results with another operator’s 4G-only results and call that a fair test of the networks as a whole.
Use Search location or navigate and zoom to the area you care about. Inspect the surroundings as well as the pin. For an office, distinguish results on the road outside from evidence inside the building. If the dashboard provides an area or Map view filter, keep it consistent between operators.
Check for Apply filters after changing selections. Wait for the map, legend and results to update; seeing a changed selector is not enough if the data still shows a loading status. Available controls can vary with the chosen source and metric.
Step 4: Read the legend, period and sample information
Before writing down a number, record what it represents. Check the time period and number of observations wherever available. An older set of tests across a large area is different from several recent observations near your route.
If the map is sparse, resist zooming out until you find a favourable number and then presenting it as a result for your street. A wider view can provide context, but it changes the question. Keep the size of the area in your notes.
What do P50, P80 and P90 mean in Network Anubhav?
Read these labels using TRAI’s definitions for this platform. Its platform description explains the speed summaries as follows:
| Displayed statistic | How TRAI describes it | How to read an illustrative result |
|---|---|---|
| P50 / median speed | Half of the tests reached or exceeded this speed. | If P50 is 60 Mbps, half of the relevant tests reached at least 60 Mbps. |
| P80 / mobile broadband | 80% of the tests reached or exceeded this speed. | If P80 is 20 Mbps, 80% reached at least 20 Mbps. |
| P90 / fixed broadband | 90% of the tests reached or exceeded this speed. | Apply it to the fixed-broadband dataset shown, using that same “at least” reading. |
The wording matters. Do not import a different percentile convention from another analytics tool and describe the mobile P80 as a speed that 80% of tests were below. TRAI uses the opposite direction in its explanation here.

A worked example: why the highest median need not settle the choice
Suppose two fictional operators have these summaries for the same technology, area, period and test source:
| Illustrative operator | P50 | Mobile P80 |
|---|---|---|
| Network A | 90 Mbps | 10 Mbps |
| Network B | 65 Mbps | 35 Mbps |
A has the higher median. B has the higher speed that 80% of its tests reached or exceeded. If you care about avoiding slower experiences, B’s P80 gives you a reason to investigate it further rather than choosing A solely for its median.
That is still not enough to declare B more reliable for your home. The two sets may use different handsets, test locations or numbers of submissions. These summaries also do not describe call failures, time spent without signal or every point between tests. Use them to decide what to verify next.
Neither statistic is the percentage of land area covered. P80 of 20 Mbps does not mean 80% of a district has 20 Mbps coverage. It summarises the relevant tests.
How to use MyCall for voice quality
Open MyCall from the navigation. The inspected view offered filters for TSP, technology, LSA and month, alongside Avg call rating and Calls rated. TSP means telecom service provider; LSA means Licensed Service Area. Check the area label instead of assuming a city and a service area are interchangeable.
MyCall lets users rate their experience on a five-point scale and identify whether they were indoors, outdoors or travelling. The official MyCall page describes it as user feedback. It is not the same as a laboratory voice-quality score or the percentage of all calls that connected.
Read a rating with its sample count. A hypothetical 4.8 average from five ratings is a weaker basis for a broad decision than the same score from a large set of relevant observations. Even a large sample can be unrepresentative if it doesn’t cover your locations or circumstances.
The view also offers chart and table presentations for operator ratings and technology mix. Use a table where available when you want exact values. Keep the selected month, technology and LSA beside any number you save.
How to interpret Independent Drive Tests
Choose Independent Drive Tests (IDT) in the navigation, or the corresponding data-source option. The IDT view provides a separate source and links to IDT Reports.
Read the accompanying report before turning a map into a recommendation. Identify:
- Where the test ran: the actual route and any stationary or indoor locations included.
- When it ran: the measurement dates, not only the publication date.
- What was tested: network modes, call tests, data tests and the conditions stated in the methodology.
- What each figure counts: calls, samples, completed tests or another denominator.
A result gathered along a Hyderabad road can be useful for someone who travels there. It does not establish reception in every flat nearby. Likewise, a poor segment on a highway should not be described as a nationwide outage. The value of an organised drive test is its documented scope: preserve that scope when sharing the result.
What to do if the dashboard is blank or results won’t load
First distinguish no observations from data that hasn’t loaded. A visible loading message, a map-configuration error or an empty provider selector is a portal problem to resolve before making a comparison. It says nothing by itself about the network in the selected area.
Recheck the source and filters, use Apply filters if shown, and allow the result to finish. If it still fails, reload once or return later. You can use an available published IDT report for its documented route, but don’t substitute that result for missing user data without saying so.
If there are genuinely no observations near your location, record “no relevant evidence found.” Widening the area can help you understand the surroundings, but keep the wider area labelled in your notes.
Can you contribute a speed test or call rating?
The citizen portal links to MySpeed and MyCall. It lists MySpeed for Android, iOS and the web, and MyCall for Android. Use the official links for your device.
For a mobile-data speed test, turn Wi-Fi off, confirm the data SIM and stop large background transfers. Note your location and whether you are indoors. Repeat at another time if the result will influence a SIM purchase. Speed testing transfers data, so check your remaining allowance before running many tests.
Read TRAI’s app privacy policy and the permission prompts. The policy describes sending test, device, network and location information for MySpeed; MyCall uses permissions to relate ratings to the call experience. Decide whether you want to contribute that information before submitting. You can inspect public results without presenting your own test as anonymous in every possible sense.
Does submitting a poor rating open a network complaint?
Don’t assume it creates a service complaint docket. TRAI’s launch note directs individual service issues to the licensed provider’s complaint mechanism. If you need a fault investigated, contact the operator, save the reference number and provide sample times, locations and what failed. A public test result can support your explanation; it does not replace that process.
Before you choose or port a SIM
Use Network Anubhav to answer a narrow question: which operator has enough relevant evidence to deserve a test at my important locations? Then verify incoming and outgoing calls, data and any work-critical task on a working connection at home and work.
Save the source, area, period, technology, metric and sample information with your comparison. If those details don’t match between operators, label the comparison as incomplete. A careful “not enough evidence yet” is more useful than a confident ranking built from incompatible results.